The RPS KDB-120 series of blister Packing Machine offer flexibility that can satisfy a very wide range of products . It can be used for the pharmaceutical packing (tablets, capsules, pills and etc.), food and other similar products packing.

The model RPS-KDB 120 was designed and improved the traditional blister packing machine after many years of experience with manufacturing and based on the trends of pharmaceutical machinery in the world.(With the concept of CGMP, packing needs to be preserved longer; the packing method should not have any influence on the effectiveness of the medicine.)In this series there is the Mid-speed RPS KDB-120 that can produce max.200 blisters/min.,and the High-speed double line RPS KDB-240 that can produce max. 400 blisters/min. Flat plate & compressed air forming offer the best package quality minimize film shrinkage and bring about uniform wall thickness and good appearance.
It uses a cross-net type roller for hot sealing, resulting in a beautiful appearance and better seal-up ability.
The temperature will not affect the medicine that can over 4 times longer than plate-type hot sealing .
Hot-pressed embossing and perforation are easily adjustable and the settings enable easy separation and beautiful apppearance.
Trimming by a precise Index,no waste packing material gets between two processed blisters and saves cost of materials.

Flow Chart

RPS KDB Machine Sealing Line (cross-net type)		Traditional Machine Sealing Dot (plate type)
Cross-net type roller,due to crossed net sealing is capable of blocking the air completely and prolonging medicine preservation about 4 times over plate type sealing. The cross-net type roller is composed of two rollers compressed in a single line with a very small contact area preventing hot air from getting into the blister pockets,so medicine effectiveness is unaffected.		Dot type (plate-type) Plate type uses dot-type sealing:air gets into the medicine where there aren't dots and thus shortens expiration. Since the sealing area is larger and sealing time longer, during the sealing process, hot air easily gets into the blister pockets. This decreases the effectiveness of the medicine.
The machine adopts a no waste cut method, so no wasted material is produced. It can save about 1/5 of material compared to traditional types.		Plate-type of triming wastes about 3-5 mm of material between two blister and increases cost at the same time.

Technical Data

Output		Max. 200 blisters/min
Forming film thinkness		0.25~0.4 mm(PVC)
Film/foil width		Max. 140mm
Forming depth		Max. 12mm
Formed area available		Max. 146 x 125mm
Reel diameter PVC film		Max.Ø500mm
Reel diameter ALU foil		Max.Ø320mm
Reel core		Ø70~Ø76mm
Power supply		220V/380V/415V 50Hz/60Hz, 3 phase
Power consumption		6~7 KW
Compressed air consumption		6 KG/CM2(bar), 150L/min
Cooling water consumption		27~31L/HR, 15°C~20°C
Forming materials		PVC,PP,PVC/PVDC PVC/ACLAR,PET
Foil materials		ALU/HARD,ALU/SOFT ALU/PAPER,ALU/POLYESTER,PP

Packing Data

Machine dimension (LxWxH)	260 x 105 x 190 (cm)
Packing size	285 x 135 x 205 (cm)
Net Weight	1000 kgs
Gross Weight	1400 kgs