Blister Packing RPS KDB-120ALU Automatic Blister Packing Machine

CONTENT

	Blister Packing Series
	RPS KDS-120
	RPS KDS-120ALU
	RPS KDS-240
	RPS KDS-800
	RPS KDS-50

Blister Packing Series

RPS KDB-120ALU Automatic Blister Packing Machine (Alu-Alu)

Alu/Alu blister packing machine RPS KDB-120ALU is specially designed for the ALU/ALU product for the purpose of better preservation and prevention of light rays. RPS KDB-120ALU has similar features with RPS KDB-120 except it's formed by cold extruding. It can also pack ALU/PVC's product.

Flow Chart

RPS KDB Machine Sealing Line (cross-net type)		Traditional Machine Sealing Dot (plate type)
Cross-net type roller,due to crossed net sealing is capable of blocking the air completely and prolonging medicine preservation about 4 times over plate type sealing. The cross-net type roller is composed of two rollers compressed in a single line with a very small contact area preventing hot air from getting into the blister pockets,so medicine effectiveness is unaffected.		Dot type (plate-type) Plate type uses dot-type sealing:air gets into the medicine where there aren't dots and thus shortens expiration. Since the sealing area is larger and sealing time longer, during the sealing process, hot air easily gets into the blister pockets. This decreases the effectiveness of the medicine.

The machine adopts a no waste cut method, so no wasted material is produced. It can save about 1/5 of material compared to traditional types.		Plate-type of triming wastes about 3-5 mm of material between two blister and increases cost at the same time.

Features

1.Compact size with all function and fast production.
2.Compressed air forming creates equivalent blister pocket.
3.Continuous motion offers best filling condition.
4.Equipped with trouble detection system which displays where the trouble is.
5.The machine adopts a no waste trimming method to save material.
6.It is very easy to exchange all the size change parts. It takes less than 30 minutes to finish.
7.Main frame is covered with stainless steel. This makes it easier to clean and meets cG.M.P. standard.
8.It is neither noise nor creates public hazards and it is easy to operate.
9.The expiration is about 4 times longer than traditional dot-type sealing.

Technical Data

Output		Max. 100 blisters/min
Forming film thinkness		0.25~0.4 mm(PVC)
Film/foil width		Max. 140mm
Forming depth		Max. 8mm
Formed area available		Max. 146 x125mm
Reel diameter PVC film		Max.Ø500mm
Reel diameter ALU foil		Max.Ø320mm
Reel core		Ø70~Ø76mm
Power supply		220V/380V/415V 50Hz/60Hz, 3 phase
Power consumption		6~7 KW
Compressed air consumption		6 KG/CM²(bar), 150L/min
Cooling water consumption		27~31L/HR, 15°C~20°C
Forming materials		ALU/ALU,PVC/ACLAR,PET PVC,PP,PVC/PVDC
Foil materials		ALU/HARD,ALU/SOFT ALU/PAPER,ALU/POLYESTER,PP

Packing Data

Machine dimension (LxWxH)	260 x 105 x 190 (cm)
Packing size	285 x 135 x 205 (cm)
Net Weight	1000 kgs
Gross Weight	1400 kgs

Design by: MDM WebMaster
	\| Home \| Stopper Inserter \| Syringe Filler \| Uniject M120 \| Unscrambler \| Fillers Machine \| \| Uniject Filler/Sealer \| Tooling Boxes \| Contact Us \| Blister Cartoning Machine \| \| Blister Packing \| Liquid Filling \| Bench Top \| Crimpers \| Cappers \| \| Tube filling & Sealing Monoblock \| Cosmetic Monoblocks \| Powder Fillers \| © 2007 Rormac Packaging Systems.